| 1. |
Start up the Dial-Up Networking to begin your setup: |
| |
(Win98) Start > Programs > Accessories > Communications >
Dial-Up Networking, or |
| |
(Win95) Start > Programs > Accessories > Dial-Up Networking. |
| |
|
| |
If Dial-Up Networking is not an option continue, otherwise
go to Step #2. |
| |
|
| |
Installing Dial-Up Networking: |
| |
Select Start > Settings > Control Panel |
| |
Double click Add/Remove Programs. |
| |
Click Windows Setup tab |
| |
Double click Communications. |
| |
Put a check mark in the Dial-Up Networking checkbox |
| |
Click Ok, then Ok again. |
| |
When asked if you wish to restart Windows, select NO at this time. |
| |
|
| |
In Control Panel, double click Network. |
| |
If TCP/IP is not listed, continue following the
instructions.
Otherwise click Cancel and go to Step #2 |
| |
|
| |
Click Add. |
| |
Double click Protocol. |
| |
Select Microsoft in LEFT window. |
| |
Select TCP/IP in RIGHT window. |
| |
Click Ok, then Ok again. |
| |
When prompted to restart Windows, click Ok. |
| |
After restarting, start at Step #1 again |
| |
|
| 2. |
If the Make New Connection wizard does not start, double click
Make new connection |
| |
Enter Infinity for the name of the connection and make sure the
correct modem is selected. Click Next |
| |
Enter 952 in Area Code field |
| |
Enter 9522535324 in the Phone number field |
| |
If you have Call Waiting and wish to disable it enter *70W9522535324 |
| |
If your modem calls out through a PBX phone system and needs to dial a
9 for an outside line enter 9W9522535324 |
| |
UNCHECK the Dial using the area code and country code. |
| |
Click Next, then Finish |
| |
|
| 3. |
Select properties for your newly created icon by right-clicking
on the Infinity icon and selecting Properties. |
| |
Click Server Type tab (or button) |
| |
Type of dial-up server: PPP: Windows95.....… |
| |
Under Advanced options: ONLY enable software compression should
be checked |
| |
Under Allowed network protocols: ONLY TCP/IP should be checked. |
| |
|
| |
Click TCP/IP settings button |
| |
server assigned IP address should be selected |
| |
specify name server addresses should be selected |
| |
Primary DNS: 209.134.128.1 - Secondary DNS: 209.134.128.2 |
| |
Use IP header compression and Use default gateway on remote
network should be selected. |
| |
Click Ok button on each screen until you are out of configuration. |
| |
|
| 4. |
Double click your newly created dial up Icon. |
| |
Enter your user name with a capital P & username in lower case
(example: Pjsmith). |
| |
Enter your password in ALL lower case letters. |
| |
Check Save Password to have your password saved. This may not work
the first time or if you have to enter a password when starting Windows
95. |
| |
Click Connect button to dial. |
| |
|
| 5. |
Once connected, start your PPP application such as Internet Explorer or
Netscape browser. |
